Jiangsu Lanmec Electromechanical Technology Co., Ltd.

Innovative highlights of the exhibit：

FL-K / F type magnetic powder clutch: flange input, hollow shaft output, hollow shaft support and housing rotation

Product introduction:

FL-K / F type (flange input, hollow shaft output, hollow shaft support, housing rotation) magnetic powder clutch Installation requirements: 1. Can be installed by means of base or bracket. 2. Pay attention to distinguish the input and output shafts of the clutch during installation. 3. Pay attention to the correct position of the water inlet and water outlet when using water cooling. 4. When cooling as forced air, the cooling air pipe is connected to the two screw holes of the clutch / brake coil housing. 5. It is recommended to use an axial elastic coupling to connect. When a belt connection is necessary, it is recommended to use a bracket or other mechanism to separate it from the magnetic powder clutch to prevent the shaft end from receiving radial forces. 6. The magnetic powder should be prevented from getting wet, and it should be kept away from the oil tank and water tank during installation, but due to the certain heat generated by the clutch during normal operation.

Innovative highlights of the exhibit：

FL / Y type magnetic powder clutch: shaft input, shaft output, end support and water cooling

Product introduction:

FL / Y type (shaft input, shaft output, end support, water cooling) magnetic powder clutch Due to some unique characteristics of the FL / Y type magnetic powder clutch, it has been widely used in paper making, printing, plastic, rubber, textile, printing and dyeing, wire and cable, metallurgy and other related winding and processing industries. Tension control. The FL / Y type magnetic powder clutch is composed of an active rotor, a driven rotor, and a yoke containing an excitation coil. When the excitation coil passes no current, the magnetic powder in the working cavity is loose. The three parts are assembled relatively concentrically. Under the action of the centrifugal force generated by the active rotor, the FL / Y type magnetic powder clutch forms a whole that can rotate relatively, and the annular gap between the active rotor and the driven rotor is filled with high permeability

Innovative highlights of the exhibit：

FZ-K / F type magnetic powder brake: hollow shaft connection, stop support and housing rotation

Product introduction:

FZ-K / F type (hollow shaft coupling, end support, housing rotation) magnetic powder brake FZ-K / F type magnetic powder brake is commonly used in printing machinery, paper machinery, bag making machinery, paper making machinery, wire and cable machinery, wire winding machinery, wire machinery, packing bag machinery, textile machinery, weaving machinery, woodworking machinery , Test equipment, load simulation, precision tension control of various machinery, general industrial equipment, other general industrial machinery, etc., has a very wide range of functions.

Innovative highlights of the exhibit：

FX-YS type thin magnetic powder brake: shaft connection and stop support

Product introduction:

FX-YS type (shaft coupling, end support) thin magnetic powder brake When the FX-YS type thin magnetic powder brake is operated for a long time, the surface temperature of the magnetic powder brake will increase. Therefore, special care should be taken to prevent moisture or oil from entering the interior. If the gear box is installed improperly, oil will pass through the shaft. Invade inside. Here it is recommended to completely seal with a film during installation. In addition, long-term excessive operation will cause the performance of the magnetic powder brake to be greatly reduced, or other failures will occur, so please ensure that it operates within the allowable sliding working rate. When using thin magnetic powder brakes, you must pay attention to the humidity of the use environment, that is, pay attention to the moisture around the FX-YS thin magnetic powder brakes. If the magnetic powder is damp, the performance of the magnetic powder brake will be affected, so the machine will be damaged and the production will be affected. Work is something we do not like. The small maintenance knowledge is very helpful to you. The usual maintenance is the most important.

Innovative highlights of the exhibit：

● Small size, save power configuration and reduce installation space; ● Constant current output, the tension is more stable; ● Digital display, easy to remember; encoder knob, high precision.

Product introduction:

Technical Parameters Power input DC 24V ~ 27V Power output DC 0 ~ 24V DC 0 ~ 3A Features ● Small size, save power configuration and reduce installation space; ● Constant current output, the tension is more stable; ● Digital display, easy to remember; encoder knob, high precision. Dimensions: length x width x depth = 98 x 50 x 93mm Hole size: length x width = 91 x 44mm

Innovative highlights of the exhibit：

The current output by the SC-1 tension controller can be continuously adjusted from 0 to the standard value, and has the functions of extreme stability, small ripple coefficient, and current limiting protection.

Product introduction:

The current output by the SC-1 tension controller can be continuously adjusted from 0 to the standard value, and has the functions of extreme stability, small ripple coefficient, and current limiting protection. It is a special steady current power supply for magnetic powder brake or magnetic powder clutch. Technical Parameters: 1. Power supply voltage: AC220V ± 10% 50HZ 2. Working environment: ambient temperature: -10 ℃ ～ 40 ℃ relative humidity: less than 85% 3. Control mode: manual adjustment 4. Display mode: Math display

Innovative highlights of the exhibit：

A roll diameter tension controller can be set, and only a proximity switch or an encoder needs to be installed to measure the roll radius, and the controller performs tension control according to the roll diameter.

Product introduction:

SC-2H automatic tension controller adopts liquid crystal display, can choose Chinese and English display, the interface is friendly and easy to use, it can output 0-24V / 4A to directly drive magnetic powder clutch and magnetic powder brake; it can also output 0-5V and 0-10V , Control the inverter, servo motor or other actuators to perform high-precision tension control on the winding system. It can be widely used in papermaking, printing, packaging, textile, printing and dyeing industries. SC-2H type automatic tension controller can be equipped with roll diameter tension controller, only need to install a proximity switch or encoder to measure the roll radius, the controller will control the tension according to the roll diameter.

Innovative highlights of the exhibit：

The "Lanmec" brand safety chuck has ensured that the process accuracy is within the allowable range, but when installed with the inflation shaft, the different center of gravity must be less than 0.3°

Product introduction:

Security chuck features: 1. The safety chuck is a quick, accurate, simple and safe coupling for the working mechanism that frequently needs to connect the transmission and disengage the action 2. Special heat treatment process is adopted for the chuck bracket, which greatly prolongs the service life 3. All the key dimensions of the chuck are processed by the machining center and CNC machine to ensure its positioning accuracy

Innovative highlights of the exhibit：

It is suitable for rewinding and unwinding of coating, slitting, printing, compounding, paper making, bag making, plastic and other related machinery, which can effectively improve work efficiency.

Product introduction:

The convex key type inflation shaft is generally made according to the needs of actual application. There are no standard parts, and different types are selected according to different actual needs. Common types are aluminum alloy inflation shaft, expansion key inflation shaft, blade-type inflation shaft, tile-type inflation shaft, etc., some distinguish between metal and non-metal. The inflatable shaft is generally designed by the user and provided to the manufacturer of the inflatable shaft. At the same time, the customized requirements must be attached, such as the weight of the inflatable shaft, the material and the accuracy requirements. The manufacturer will evaluate the technology according to the drawings provided by the user and other requirements, and then carry out production.

Innovative highlights of the exhibit：

The air-expansion shaft is especially suitable for the lifting and unwinding of paper tubes with high roundness requirements or surface rewinding and unwinding, which can effectively improve work efficiency and product quality.

Product introduction:

Tile-type inflatable shafts are generally made according to the needs of actual applications. There are no standard parts, and different types are selected according to different actual needs. Common types are aluminum alloy inflation shaft, expansion key inflation shaft, blade-type inflation shaft, tile-type inflation shaft, etc., some distinguish between metal and non-metal. The inflatable shaft is generally designed by the user and provided to the manufacturer of the inflatable shaft. At the same time, the customized requirements must be attached, such as the weight of the inflatable shaft, the material and the accuracy requirements. The manufacturer will evaluate the technology according to the drawings provided by the user and other requirements, and then carry out production.

Innovative highlights of the exhibit：

This continuous-action reel provides a safe and effective connection device to prevent the reel from loosening or tightening during operation, which can effectively improve work efficiency and product quality.

Product introduction:

Features of the safety chuck: 1. Automatically close the handwheel to prevent unintentional shaft release during operation 2. Designed for various load and speed conditions 3. Handwheel lock turret winder and related applications 4. Interchangeable inserts minimize the cost of ownership and ensure long-term optimal performance 5. Unique socket design minimizes vibration for high speed and high load applications 6. Standard or customizable shaft requirements for most braking and transmission

Innovative highlights of the exhibit：

It is suitable for rewinding and unwinding of coating, slitting, printing, compounding, paper making, bag making, plastic and other related machinery, which can effectively improve work efficiency.

Product introduction:

I. Wide application: The convex key type inflation shaft is an independently designed part, from 1 inch to 12 inches, the length is determined by the actual needs of the customer, where there are slit printing, rewinding, coating, laminating, bag making, paper making, etc. The machine for equipment or other relevant center winding machines can be applied to the inflatable shaft. Second, cost-effective: The design of the shaft is designed for practical work, and can be applied to various types of coils such as thick, thin, wide and narrow. 3. Long use time and simple maintenance: Although the inflation shaft is a mechanical accessory, each part in its own structure has fixed specifications and can be used interchangeably, making it easy to maintain.

Innovative highlights of the exhibit：

It is suitable for rewinding and unwinding of coating, slitting, printing, compounding, paper making, bag making, plastic and other related machinery, which can effectively improve work efficiency.

Product introduction:

I. Wide application: The convex key type inflation shaft is an independently designed part, from 1 inch to 12 inches, the length is determined by the actual needs of the customer, where there are slit printing, rewinding, coating, laminating, bag making, paper making, etc. The machine for equipment or other relevant center winding machines can be applied to the inflatable shaft. Second, cost-effective: The design of the shaft is designed for practical work, and can be applied to various types of coils such as thick, thin, wide and narrow. 3. Long use time and simple maintenance: Although the inflation shaft is a mechanical accessory, each part in its own structure has fixed specifications and can be used interchangeably, making it easy to maintain.

Innovative highlights of the exhibit：

FZ-J type magnetic powder brake: shaft coupling, frame support

Product introduction:

FZ-J type (shaft coupling, frame support) magnetic powder brake Structure and working principle: The magnetic powder brake is composed of a rotor, a stator, and a magnetic yoke containing an excitation coil. The three parts are relatively concentrically assembled to form a relatively rotatable whole. The annular gap (working cavity) between the rotor and the stator is filled with high permeability Alloy magnetic powder. When there is no current through the excitation coil, the magnetic powder in the working cavity is in a loose state. Under the action of the centrifugal force generated by the rotor, the magnetic powder is evenly thrown on the inner wall of the rotor. There is no force interaction between the rotor and the stator. The magnetic powder brake is in a no-load state and has no torque output.

Innovative highlights of the exhibit：

JP-8 is a high-performance full-touch screen correction controller, which is specially used for automatic correction when the position of the material shifts during winding, unwinding or conveying.

Product introduction:

When the controller is used in conjunction with an analog signal output sensor such as ultrasonic, it will automatically correct when the position of the material is shifted during winding, unwinding or conveying according to the detection signal. When the controller is used with an analog signal output sensor such as ultrasound, it calculates the size of the material position deviation according to the detection signal, and corrects the driving parameters of the correction motor in time to achieve high-precision position correction of the material. It can also be used with photoelectric and other digital signal output sensors to control the forward and reverse rotation of the correction motor to achieve the purpose of correction.

Innovative highlights of the exhibit：

JP-5 photoelectric correction controller-is a system for correcting and controlling the position deviation of the coil material in the production line when it is transferred. It has the functions of automatic detection, automatic tracking, and automatic adjustment.

Product introduction:

This correction controller can track and correct the center line or edge of paper, film, non-woven fabric, aluminum foil and other materials to ensure the neatness of winding and slitting. The system is widely used in light industry, textile, printing and dyeing, printing, strip steel, non-ferrous metal and other industries. The mechanical actuator adopts synchronous motors, ball screws, sliding bearings and other components, which have the advantages of simple structure, high precision, and maintenance-free. The telescopic part adopts a built-in ball screw mechanism to prevent the screw from being affected by bending moment and dust.