Zhongshan Nuobang Color Equipment Co.,Ltd.

Innovative highlights of the exhibit：

In addition to all the functions of the previous generation, all parts are CNC precision machined, using imported brand accessories, touch technology, and unique electronic control fault detection functions.

Product introduction:

Features: In addition to all the functions of the previous generation, all parts are CNC precision machined, using imported brand accessories, using touch technology, unique electronic control fault detection, pressure setting automatic operation, and other functions, making user operation and setting more convenient and simple. 1. Electric control detection: The entire machine adopts PLC and touch screen control, with stable functions and few faults. At the same time, it can detect the status of each control component, making maintenance simple and convenient. 2. All pressure adjustments are convenient: uniform ink pressure (0-200N), color spreading pressure (0-1700N), uniform can be set on the screen, and the instrument automatically executes. The uniform ink pressure and color spreading pressure are adjustable higher than the old model, and the color spreading effect of rough paper is better. 3. The imprint leaves a 38mm secondary color development light color position.

Innovative highlights of the exhibit：

Color development accuracy: The repeated color difference value detected by a spectrophotometer can reach a Δ E value below 0.8 (average of ten times).

Product introduction:

Input voltage: AC220V 50Hz Instrument power: 350W Effective area of ink color strip: 40 × 210mm (4 pieces) 60 × 210mm (3 pieces) 100 × 210mm (2 pieces) optional Exhibition material size: 290X250mm Uniform ink pressure: eccentric adjustment Uniform ink speed: 0-1450 rpm adjustable Color development speed: 0-15 rpm adjustable (slower and more torque than the previous generation model, and can also be used with larger pressure settings) Instrument dimensions: 555X440X320MM Uniform ink time: adjustable from 1 second to 10 hours (usually 60 seconds) Rubber roller specification: ø 67 × 229MM (maximum color development area 229 × 210mm)

Innovative highlights of the exhibit：

Unique characteristics of the instrument: After the ceramic roller rotates and the ink is evenly applied, the printing material and plate cylinder start rotating synchronously for one cycle to complete the sampling work.

Product introduction:

Unique Features of the Instrument: 1.After ink is evenly applied by the rotating ceramic roller, the plate cylinder makes one full rotation for inking when engaged, then disengages. The plate cylinder engages the impression cylinder with synchronous positioning, and the impression cylinder completes sampling in one full rotation. The entire process runs fully automatically. This design thoroughly eliminates ink streaks and ensures superior sampling quality. 2.Pressure can be adjusted flexibly for four components: doctor blade, ceramic roller, plate cylinder and material cylinder. 3.Pressure can be adjusted flexibly for four components: doctor blade, ceramic roller, plate cylinder and material cylinder. 4.Equipped with large-diameter cylinders, enabling easy material loading, plate mounting and plate cleaning. 5.Intermittent sampling design effectively reduces ink streaks.

Innovative highlights of the exhibit：

Suitable for ordinary or UV ink, printing materials with horizontal movement and color display, suitable for non bending materials such as iron sheet, cardboard, glass, plastic board, etc.

Product introduction:

Color Display Machine Parameters 1. Input Voltage: AC220V, 50Hz 2. Power: 350W 3. Effective Area of Ink Strips: 40×200mm × 4 strips 4. Substrate Size: 270×250mm 5.Overall Dimensions (L×W×H, approx.): 530×480×330mm 6. Ink distribution speed: Stepless speed regulation (0-1450 rpm) 7. Ink distribution mode: 4 selectable modes 8. Ink distribution time: Adjustable from 0 to 10 hours (standard: 60 seconds) 9. Ink distribution pressure: Adjustable via touch screen 10. Color display pressure: Adjustable via touch screen 11. Application: Color proofing for rigid materials such as iron sheet and aluminum sheet.

Innovative highlights of the exhibit：

Adopting a PLC+touch screen+touch button structure, the technology is mature and stable, easy to operate and use.

Product introduction:

NCB ink proofer, item CB100-E gravure proofing machine Input voltage AC220V, 50Hz-60Hz 150W Printing force: 00.0-100.0% fine adjustment Printing speed: 10-130 metre/Minute, Touch Control Adjustment Dimension: 525X430X280mm Anilox cylinder size: ∮130X170mm Pattern engraving: Official standard, Custom with special lineature is available Standard: roll circumference 411 MM roll width 170 MM Official engraving lineatures of 40um (80L /cm); 45um (75L/cm); 50um(70L/cm); 55um(60L/cm) Color Strips size: 50x80mm x 4 prismatic Tooth angle 120° Screen Angles 45° Substrate size: 140x328mm (semi-perimeter) or 140x658mm (full perimeter) Printing area: 120x380mm Paper core: Inside diameter 76MM, outer diameter: 95MM Material diameter: 200mm Convenience function: Automatic switching of white cover or low precision color printingchromaticity printing. Net weight: 80KG Function: Low precision color register pringing, roll∮130 can automatically swich white register function. Advantages: 1. Adopt PLC+ touch screen+touch button structure, mature and stable technology, easy to operate and use; 2. Gravure plate+ scraper round proofing, with a printing press structure to; 3. The imprint cylinder is equipped with positioning device, electric pressing, without compressed air source; 4. Automatic positioning of printing plate, easy operation; 5. Suitable for various types of ink, gravure ink is also easy to clean; 6.Printing plate content can be customized according to customer requirements,electric engraving or laser plate making can be uniform. 7. It is a necessary instrument for computer color matching.

Innovative highlights of the exhibit：

The instrument can be used for coating, solid color, and dot pattern proofing. The coating area is resin plate material, and the printing material is printed in a translational manner.

Product introduction:

Caibang CB400-Y Flexographic Color Proofing Machine Application: Rigid printing substrates, single-color proofing (for color matching, testing, etc.) Input Power: 220V, 50/60Hz Power Rating: 300W Inking Method: Dropper ink feeding Substrate Thickness for Proofing: 0.01-5mm Substrate Size for Proofing: 290×210mm Plate Size: 300×220mm Printing Area: 280×200mm Anilox Roller Specification: φ70×220mm Plate Thickness: Standard flexible plate 1.7mm + adhesive backing 0.3mm Plate-to-anilox Roller Pressure: Adjustable within ±1mm with scale indication Plate-to-impression Pressure: Adjustable within ±1mm with scale indication

Innovative highlights of the exhibit：

The digital viscosity tester uses PLC, touch screen, and servo motor to accurately display the instantaneous copper roller speed, water tank temperature, and other testing conditions.

Product introduction:

Technical parameters of Caibang CB-50T viscosity tester: Copper roller spindle speed: I gear -400 rpm, II gear -800 rpm, III gear -1200 rpm, IV gear -1600 rpm, V gear -2000 rpm Additional self setting speed (100-2000) rpm Power supply voltage: 220V 50HZ Total electrical power: 1600 watts (including 800 watts for the motor and 800 watts for the water tank) The horizontal error of the spindle copper roller after leveling on the workbench is 0.03mm Standard single heat constant temperature water tank with a temperature adjustment error of ± 0.2 ℃ Dual use cold and hot ± 0.1 ℃ (optional) Display accuracy: 0.1 ink viscosity units Under the same testing conditions, the retest error is ± 0.3 for ordinary ink and ± 0.5 for UV ink Printing: testing time, number, temperature, speed, viscosity value, sending PC data TV value One standard easy to disassemble and clean ink injector (standard capacity 1.32CC) Instrument overall size: 750x300x480mm Total weight of instrument: 130KG Noise less than 50 decibels Characteristics of CB-50T Ink Viscometer: 1. The digital viscosity tester adopts PLC, touch screen, and servo motor to accurately display the instantaneous copper roller speed, water tank temperature, and other testing conditions; 2. The instrument is equipped with a user-friendly design, fully automatic testing, and there is no need to manually operate the clutch pressure between the testing roller and the ink leveling roller during the process; 3. The instrument comes with functions such as testing ink and increasing viscosity, and can optionally be equipped with the Excel table function of sending data to the PC; 4. Equipped with ink cleaning scraper, easy to clean and save consumables; 5. High automation, reduce Personal equation, and high stability; 6. UV rubber rollers are equipped with high-quality Japanese rubber rollers as standard; 7. The constant temperature water tank can be optionally equipped with a cold and hot constant temperature water tank;

Innovative highlights of the exhibit：

High-precision automatic ink dispensing with dual valves; large-capacity silos allow quick barrel replacement; linked stirring eliminates cleaning to cut costs.

Product introduction:

With the automatic color matching weighing system, printing companies no longer need to maintain large stocks of spot color inks and can prepare various spot color inks on demand. All spot color inks can be formulated according to calculated formulas, enabling customized ink blending. It features a unique automatic proportional compensation function for fast ink supply to complete batching tasks efficiently and rapidly. Fitted with large and small dual output valves, the dispensing system delivers precise control for every spot color ink with weighing accuracy within 1/10,000.

Innovative highlights of the exhibit：

Customized for central color matching systems, this unit features large flow rates and oversized pipelines, delivering over 5kg of ink per minute with far higher output efficiency than standard printing pumps. Fully pneumatic operation ensures outstanding durability and easy maintenance.

Product introduction:

Plunger pumps for central color matching ink supply stand out from common printing machine pumps on the market mainly by their high flow rate and superior durability. Ordinary pumps for printing machines deliver less than 3.5 kg of ink per minute, as printing equipment does not require high flow output. In contrast, color matching operations demand high flow for higher efficiency and involve frequent running, imposing stricter durability requirements. Caibang plunger pumps operate purely on pneumatic power with simple, hassle-free maintenance. Caibang ink plunger pumps are specially engineered for central tinting systems. Designed with large flow capacity and wide-diameter ink pipelines, they outperform conventional printing ink pumps by a wide margin. Their ink output exceeds 5 kg per minute, versus under 3.5 kg for standard pumps. To pump 50 kg of ink, a Caibang unit takes less than 10 minutes, while alternative pumps require over 30 minutes for the same volume.

Innovative highlights of the exhibit：

Fully Pneumatic High-Flow Pump for High-Viscosity Ink Transfer, Suitable for Central Color Mixing Systems, Durable & Easy to Maintain

Product introduction:

Caibang CB-570B Technical Parameters Input Voltage: No power supply required; operates solely by air source Cylinder Bore: 150 mm Pressure Ratio: 18:1 Pipeline Inner Diameter: 36 mm Hose Inner Diameter: 40 mm Operating Air Pressure: 0.8–1 MPa Recommended Max Cycles: 60 cycles per minute Air Consumption: 0.32 cubic meters per minute Air Inlet Specification: 12 mm Delivery Volume per Cycle: 750 cc Ink Flow Rate: Over 5 kg per minute Overall Dimensions: 1064×620×(1380/2340) mm Net Weight of Complete Unit: 190 kg Applicable Ink Viscosity: Offset common ink or UV ink with viscosity below 800,000 mPa·s; conventional printing ink viscosity is below 500,000 mPa·s Applicable Materials: Conventional offset ink, offset UV ink and other high-viscosity materials. Can be installed on automatic ink supply units of printing presses or weighing systems for automatic color matching. Advantages of Caibang CB-570B 1.Adopts high-quality Airtac cylinders, durable, good-looking and low maintenance cost. 2.Pump body precision-machined from 304 stainless steel for excellent corrosion resistance. 3.Exquisite structural design; no electricity needed for cylinder reciprocating switching. 4.High-flow design ideal for automatic weighing & color matching with high working efficiency. 5.Equipped with pressure gauge for quick visual diagnosis of pump faults. 6.Fits standard 200 kg ink drums with inner diameter of 570 mm, compatible with or without plastic inner bags. 7.Simple operation, robust and long service life.

Innovative highlights of the exhibit：

Compact Pneumatic Ink Plunger Pump, High Flow Rate Compatible with 20KG Ink Drums, Durable & Easy Maintenance for High-Viscosity Ink Transfer

Product introduction:

Caibang CB-30 Technical Parameters Input Voltage: No power supply required, operated only by air source Cylinder Bore: 150 mm Pressure Ratio: 18:1 Pipeline Inner Diameter: 36 mm Hose Inner Diameter: 40 mm Operating Air Pressure: 0.8–1 MPa Max Recommended Cycles: 60 cycles per minute Air Inlet Pipe Specification: 8–12 mm Air Consumption: 0.32 cubic meters per minute Delivery Volume per Cycle: 750 cc Ink Flow Rate: Over 5 kg per minute Overall Dimensions: 578×365×(1400/1800) mm Net Weight of Complete Unit: 91 kg Applicable Ink Viscosity: Conventional offset ink and UV ink with viscosity below 800,000 mPa·s; the viscosity of regular printing ink is less than 500,000 mPa·s Application: Transfer of conventional offset ink, offset UV ink and other high-viscosity materials. It can be installed on automatic ink supply devices of printing presses or weighing systems for automatic color matching. Features of Caibang CB-30 1.Equipped with high-quality Airtac cylinders, featuring durability, nice appearance and low maintenance cost. 2.The pump body is precision-machined from 304 stainless steel with excellent corrosion resistance. 3.Exquisite structural design; no electricity needed for cylinder reciprocating switching. 4.High-flow design, perfectly suitable for automatic weighing and color matching with high working efficiency. 5.Fitted with a pressure gauge to quickly identify pump failures at a glance. 6.Matches standard 20KG ink drums with an inner diameter of 300 mm, compatible with or without plastic inner bags. 7.Simple operation, sturdy structure and long service life.

Innovative highlights of the exhibit：

Multi-station Automatic Color Mixing System with Plunger Precision Dosing, Suitable for Sample Formulation of Various Flexographic & Gravure Inks

Product introduction:

CB-18D Technical Parameters Applicable Inks: Solvent-based, water-based and UV inks for gravure printing; solvent-based, water-based and UV inks for flexographic (relief) printing Number of Ink Tanks: Up to 18 units Discharging Technology: Plunger pump Discharging Mode: Sequential feeding by weight Max Single Dosing Volume: 1000 g Minimum Dosing Volume: 0.01 g Discharging Speed: 200 g/min Ink Tank Capacity: 2.3 KG Inner Diameter of Ink Tank: 90 mm Valve Seal Material: PTFE Ink Tank Material: 304 stainless steel Receiving Tray Max Size: Diameter 120 mm, Height 120 mm Minimum Container Opening Diameter: 50 mm Power Supply: 110/220V±10%, 50/60Hz Rated Power: 150 W Machine Overall Dimension: 850(L) × 1000(W) × 1220(H) mm Packing Dimension: 900(L) × 1100(W) × 1320(H) mm Floor Space: 0.86 m² Net Weight (with 18 ink tanks): 120 KG Gross Weight (with 18 ink tanks): 140 KG

Innovative highlights of the exhibit：

Fast sampling with minimal consumables, true rotary-to-rotary replication of mass gravure printing effects, stable and accurate sampling with easy operation.

Product introduction:

Caibang CB-150A Gravure Proofing Machine is suitable for sampling water-based and solvent-based gravure inks and coatings. It can produce standard color charts and printed samples, serving as dedicated equipment for ink color matching, hue & concentration testing, gloss measurement and VOC detection. Adopting a rotary-to-rotary structure with anilox roller, doctor blade and drip ink feeding system, the machine consumes minimal materials. It delivers much higher sampling precision and repeatability than traditional wire coating rods, with printing effects comparable to mass-production gravure presses. Touchscreen digital pressure and speed adjustment are available with precise positioning and wide adjustable pressure range. Equipped with automatic positioning, electric impression and one-click switch between white background and color overprint modes, it features easy operation and simple cleaning. Supplied with a multi-gradient anilox roller as standard and custom rollers are available. Compact and lightweight, it perfectly simulates real mass printing conditions, ideal for R&D and quality inspection sampling of various manufacturers.

Innovative highlights of the exhibit：

Low-temperature rapid homogeneous mixing without temperature rise; integrated hole-free mixing blade for easy cleaning; direct drive design with energy saving and high torque, solving the industry pain points of ink stratification, heat generation and difficult cleaning during mixing.

Product introduction:

Caibang CB171A Ink Mixer Main Technical Parameters Input Voltage: 220V, 50Hz Total Power: 1.5KW Standard Overall Dimension: 530×680×1180mm Dimension with Mixing Stand: 530×680×1390mm Dimension with Tilting Rack & Barrel: 680×770×1050mm Mixing Barrel Spec: Ø400×400mm, 304 stainless steel, wall thickness 1.5mm Mixing Capacity: Min. 4KG, Max. 50KG Rotating Speed: 0-50 RPM Net Weight: 185KG Optional Accessory: Tilting discharge rack Features Simple and easy operation. Low-speed intermittent mixing along barrel inner wall. Unique impeller design turns and shears ink thoroughly to achieve uniform mixing within 5 minutes without ink temperature rise. Adjustable mixing speed. L-shaped integrated forming mixing impeller with no screw holes, easy to clean. Direct drive transmission to reduce power loss.

Innovative highlights of the exhibit：

Suitable for small & medium batch tinting, fast low-temperature mixing without heating. Integrated hole-free blade for easy cleaning; energy-saving direct drive with low loss, solving ink heating, stratification and cleaning troubles for small batches.

Product introduction:

Caibang CB171B Ink Mixer Main Technical Parameters Input Voltage: 220V, 50Hz Total Power: 1.5KW Standard Dimension: 530×680×1060mm Dimension with Mixing Stand: 530×680×1270mm Dimension with Tilting Rack & Barrel: 680×770×930mm Mixing Barrel: Ø400×280mm, 304 stainless steel, wall thickness 1.5mm Mixing Capacity: Min. 4KG, Max. 30KG Rotating Speed: 0-50 RPM Net Weight: 176KG Optional Accessory: Tilting Discharge Rack Features 1.Simple and convenient operation. 2.Low-speed intermittent mixing along the barrel wall. The special impeller turns and shears ink to achieve even mixing within 5 minutes without temperature rise of ink. 3.Adjustable mixing speed. 4.L-shaped integrally formed mixing impeller without screw holes for easy cleaning. 5.Direct drive transmission to reduce power loss.

Innovative highlights of the exhibit：

Compact desktop design for easy movement, low-temperature ink mixing without heating, integrated blade for easy cleaning, simple disassembly & assembly, auto barrel locking, ideal for sample blending.

Product introduction:

CB172 Ink Mixer Machine Features 1.Simple and easy operation. 2.Low-speed intermittent mixing along the barrel wall. The special impeller turns and shears ink to achieve uniform mixing within 5 minutes without ink temperature rise. 3.Adjustable mixing speed. 4.Easy stirrer replacement with automatic barrel locking. 5.L-shaped integrally formed mixing impeller without screw holes for effortless cleaning. 6.Direct drive transmission to reduce power loss. 7.Desktop design for easy relocation. Technical Parameters Input Voltage: AC220V 50/60Hz Total Power: 600W Rotating Speed: 0–50 RPM Overall Dimension: 355×550×35mm Mixing Barrel: 10KG stainless steel barrel Mixing Capacity: Min. 2KG, Max. 12KG Net Weight: 45KG

Innovative highlights of the exhibit：

Mini desktop micro mixing, homogenize ink without heating, barrel no-clean design, pneumatic upgraded version available.

Product introduction:

Caibang CB-250 Ink Mixer Main Technical Parameters Input Voltage: AC220V 50/60Hz Total Power: 200W Overall Dimension: 478×280×416mm Mixing Barrel: Standard 2.5KG ink tank Mixing Capacity: Min. 1KG, Max. 2.5KG Rotating Speed: 0-50 RPM Net Weight: 35KG Optional Pneumatic Version: Mixing capacity from 1KG to 5KG Features 1.Simple and easy operation. 2.Low-speed intermittent mixing along barrel wall. Special impeller turns and shears ink for even mixing within 5 minutes without ink temperature rise. 3.Adjustable mixing speed. 4.Easy stirrer replacement for standard 2.5KG ink tank, automatic tank locking, no cleaning required after tank use. 5.L-shaped integrally formed mixing impeller without screw holes for easy cleaning. 6.Direct drive transmission to reduce power loss. 7.Desktop design for easy movement.

Innovative highlights of the exhibit：

Dual servo for precise material transport, automatic pneumatic quick plate roller replacement, enclosed hot air drying, modular optional accessories for printing test and production with various substrates and inks.

Product introduction:

Roll-to-Roll Gravure Printing Tester CB-350EX Applicable Substrates Roll materials such as paper, plastic film, non-woven fabric, copper and aluminum foil for printing tests or single-color mass production. Applicable Inks Solvent-based, UV, LED, water-based inks and gravure coatings. Machine Features 1.Single-side frame design for intuitive and convenient operation. 2.Equipped with Delta PLC and Weinview electrical components from Taiwan, featuring high automation. 3.Automatically control roller speed, rubber roller engagement/disengagement, and doctor blade pressing & retraction. 4.Pneumatic tip structure enables quick plate roller replacement to save operation time. 5.1000W servo motors drive printing and rewinding sections for stable power, compatible with thick substrates. Printing length and speed are precisely adjustable via potentiometer. 6.Safe flameless hot air circulation drying system, max temperature 100°C with 1080m³/h fan for sufficient drying. 7.Closed ink tray prevents ink splashing at high speed, reserved port for external circulating ink supply pump. Air expanding shafts for unwinding & rewinding for easy material change; magnetic powder clutch for adjustable tension control. 8.Optional accessories: UV curing, LED curing, web guiding, corona treatment, static elimination, full-automatic tension control, flexo conversion, oscillating doctor blade (to reduce streaks), gravure & flexo dual-purpose function. Technical Parameters Operating Voltage: AC220V 50/60Hz Control Voltage: DC24V Total Power: 10KW Printing Speed: 0–350 m/min; 1KW main motor + 1KW rewinding motor for stable power Operating Air Pressure: 0.4~0.6MPa (air compressor to be provided by user) Drying Power: Heating 6KW, Fan 370W Plate Roller Size: φ130×300mm Standard Plate Quantity: 1 (customizable) Core Size for Unwinding/Rewinding: 3-inch Printing Area: 220×408mm Press Roller Material: Silicone Standard Printing Width: 220mm, compatible with 100–250mm wide rolls (max roll diameter ≤300mm, width ≤250mm) Machine Dimension (L×H×W): 2000×1760×918mm Net Weight: Approx. 900KG

Innovative highlights of the exhibit：

Multi-aperture spectrophotometer with ultra-high repeatability, all-in-one measurement of color difference, density and dot gain, long battery life and Bluetooth connection for printing color control.

Product introduction:

CB-X5 Machine Features Suitable for printing and packaging industries. Realize quantitative analysis of CMYK and spot colors, and provide quantitative operation guidance for printing operators. Technical Parameters Measuring Geometry: 45/0, 2°, 10° Integrated physical positioning hole: Supported Measurement Repeatability: dE*ab ≤ 0.02 Display Accuracy: 0.01 Illumination Source: Full-spectrum balanced LED light source Apertures: Φ11mm, Φ10mm, Φ6mm, Φ5mm, Φ3mm Measurable Items: Spectral reflectance, LabCH, color difference, CMYK density, etc. Density Measurement: CMYK density, dot area, dot gain, overprint, print contrast, hue error, grayness Illuminants: A, B, C, D50, D55, D65, D75, F1, F2, etc. Wavelength Interval: 10 nm Wavelength Range: 400–700 nm Reflectance Measurement Range: 0–200% Reflectance Resolution: 0.01% Measurement Time: Approx. 1 second Interfaces: USB, Bluetooth Battery Life: 8,000 consecutive measurements per full charge Light Source Lifespan: 5 million measurements Languages: Simplified Chinese, English

Innovative highlights of the exhibit：

D/8 spectrophotometer with high precision, five apertures and UV function, multiple light sources & color difference formulas, horizontal design, convenient and long battery life.

Product introduction:

CB-X68 Technical Parameters Measuring Geometry: D/8, SCI+SCE Measurement Repeatability: dEab ≤ 0.02 Display Accuracy: 0.01 UV Light Source: Supported Measurable Items: Spectral reflectance, CIE-Lab, CIE-LCh, color difference (ΔEab, ΔEcmc, ΔE94, ΔE*00), whiteness, yellowness, etc. Illuminants: A, B, C, D50, D55, D65, D75, F1, F2, etc. Viewing Angles: 2°, 10° Wavelength Interval: 10 nm Wavelength Range: 400–700 nm Reflectance Measurement Range: 0–200% Reflectance Resolution: 0.01% Measurement Time: Approx. 1 second Interfaces: USB, Bluetooth Battery Capacity: 8,000 consecutive measurements per full charge Light Source Lifespan: 5 million measurements Languages: Simplified Chinese, English Machine Features Ultra-high repeatability precision: dE*ab ≤ 0.02 Horizontal press-type measurement with physical positioning observation window Over 30 measurement parameters and nearly 40 evaluation illuminants 5 interchangeable measuring apertures: Φ11mm, Φ10mm, Φ6mm, Φ5mm, Φ3mm, suitable for samples of various sizes

Innovative highlights of the exhibit：

Simple operation, used for quick drying of color matching test strips.

Product introduction:

CB175 Air Dryer Technical Parameters: Input Voltage: 200V 50Hz Total Power: 0.8/1.6kW Overall Dimension: 320×320×320mm Net Weight: Approx. 10KG Function Easy to operate, designed for fast drying of color matching test strips

Innovative highlights of the exhibit：

Wide worktable with ample printing area, high-speed pad printing up to 1000 pieces per hour, stable pneumatic operation, compact and durable body.

Product introduction:

Caibang CB-70 Screen Printing Machine Technical Parameters Worktable Size: 220×400 mm Max Printing Area: 150×250 mm Max Printing Speed: 1000 pcs/hr Air Consumption: 104 litre/min (6 bar) Power Supply: 110/220V, 60/50Hz, 50W Overall Dimension: 550×450×700 mm Net Weight: 80 KG

Innovative highlights of the exhibit：

6KW high-power heating, multiple safety protections, RS485 communication for remote temperature control, large air volume, fast temperature rise and compact size.

Product introduction:

Industrial Hot Air Blower CB-48 Technical Parameters Input Power Supply: AC220V, 50-60Hz, 6.5kW Air Flow Rate: 830–1080 m³/h Fan Rotation Speed: 2800 r/min Electric Heating Power: 6kW Control Configuration: Earth leakage circuit breaker, mechanical overtemperature protection, temperature setting function, RS485 communication, AC contactor, solid state relay, temperature sensor, temperature controller, overtemperature alarm, etc. Controllable Temperature Range: Ambient temperature ~ 100°C Net Weight: 28KG Overall Dimension: 725×385×492mm (L×W×H)

Innovative highlights of the exhibit：

2KW high-power UV light source, 0-10m adjustable conveying speed, Teflon mesh belt, stable forced air cooling

Product introduction:

UV Curing Machine CB300 Technical Parameters Equipment Power Supply: AC220V, 50Hz, 250W Overall Dimension: 1250×540×1100mm Light Source Power: 2kW (1 lamp) Conveying Speed: 0-10 m/min Mesh Belt Material: Teflon Mesh Belt Width: 300mm Inlet Height: 100mm Cooling Method: Forced Air Cooling