Vulcan Computer To Flexo Plate system adopts the latest development of Amsky H256 laser head technology.A full size of 50 inch x80 inch plate output only needs 30 minutes.

1、Using a high energy power fiber laser device, at 5080dpi,it only takes 30 minutes to output a full image size of 50inchx80inch plate.It can also allow to increase the productivity by 10% for urgent need. In this way, the customer can meet the deadline of some urgent iobs 2、256 channels independent modulating technology allows the laser to split into 256 channels with control of each channelwhich greatlyincrease the productivity, The laserspot shape is rectangle type which can deliver a much better dot quality and performance of image output. 3、The H256 laser head use a new high power magnification optical system to achieve a 5080dpi optical resolution. 4、At 5080dpi.it can image slant or circular line as fine as 15um:forverticaland horizontal line, it can be as fine as 5um.Each image pixelis very sharp and clear This can 5、This new generation of Light Valve Device can also allow to raise the resolution to 10160dpi.At this super hieh resolution,the laserspot size is 2.5umx2.5um and can image 5 or less um lines. 6、TheLV head can also support2540dpi output.lfthe requirement ofimaging output is not critical,the mode of output can be adjusted to double line overlapping exposure which can greatlyincrease productivity to 150%6. 7、Voice coilmotor device is used for dynamic autofocus function.This can ensure accurate focus during exposure on the non-uniform surface offlexo plate, 8、Double linesand triple lines overlapping functions can allow the LAMS ablation with the superiorimage qualityand efficiency forflexo plate exposure. 9、Instant temperature monitoring and pre calibration of laserhead can make sure thelaserexposure stability and reliability. increase the color fidelity by 30%.